JCB 510-56 Telehandler: Features, Capacity and Jobsite Applications

TL;DR: The JCB 510-56 is a telehandler with a 10,000 lb maximum capacity and a 56 ft maximum lift height. It has a 74 HP Non-DEF T4 engine, an enclosed cab, and stabilizers, and it comes with a 66 inch wide fork carriage, 48 inch or 60 inch forks, and a lifting hook. Capacity drops as the boom extends, so check the load chart for the height and reach your job needs. It is part of the RocRents telehandler fleet alongside the JLG G12-55 and the SkyTrak 8042.

What Is the JCB 510-56?

The JCB 510-56 is a 10,000 lb capacity telehandler built for lifting and placing materials at height on a jobsite. It has intuitive controls and is part of the RocRents telehandler fleet.

Maximum capacity: 10,000 lbs
Maximum lift height: 56 ft
Engine: 74 HP Non-DEF T4
Cab: enclosed
Stabilizers: yes

How Much Can the JCB 510-56 Lift?

The 10,000 lb rating applies close to the machine. As the boom extends up or out, the capacity it can safely lift goes down. Check the load chart for the exact height and reach your job needs, not just the maximum rating.

The RocRents team can share the load chart details for your job.

How High Can It Reach?

The JCB 510-56 has a 56 ft maximum lift height, the highest in the RocRents telehandler fleet. The JLG G12-55 reaches 55 ft and the SkyTrak 8042 reaches about 42 ft.

What Stabilizers Does It Have?

The JCB 510-56 has wide-set stabilizers for a secure base during high lifts and on uneven ground. The SkyTrak 8042, by comparison, does not list outriggers or stabilizers.

What Attachments Does the JCB 510-56 Come With?

The JCB 510-56 comes equipped for material handling:

66 inch wide fork carriage
48 inch or 60 inch forks
Lifting hook

If the job needs something specific, ask the RocRents team what is available for the machine.

What Engine Does It Have?

The JCB 510-56 has a 74 HP Non-DEF T4 engine, so no diesel exhaust fluid is required.

What Jobs Is the JCB 510-56 Used For?

The JCB 510-56 is used for lifting and placing materials on construction sites, including:

Lifting palletized building materials with the forks
Handling suspended loads with the lifting hook
Placing materials at height on framing and structures
Loading and unloading trucks

How Does It Compare to the Other RocRents Telehandlers?

The JCB 510-56 offers 10,000 lbs of capacity and 56 ft of lift height. The JLG G12-55 offers 12,000 lbs and 55 ft. The SkyTrak 8042 offers 8,000 lbs and about 42 ft. For a closer look at the two largest machines, read JCB vs JLG Telehandlers: Key Differences for Construction Applications. To plan a rental, read What to Check Before Renting a Telehandler.

Frequently Asked Questions

How much can the JCB 510-56 lift?

The maximum capacity is 10,000 lbs. Capacity goes down as the boom extends up or out, so check the load chart for your job.

How high does the JCB 510-56 reach?

The maximum lift height is 56 ft.

What attachments come with the JCB 510-56?

It comes with a 66 inch wide fork carriage, 48 inch or 60 inch forks, and a lifting hook.

Ready to rent a telehandler?

Browse the full telehandler fleet at rocrents.com, request a quote online, or reach out to our team for a recommendation based on your job.

Call us: +1 877-617-7368

Or fill out our contact form: https://rocrents.com/contact-us/